Loading True North Map…
Communications & Power Industries Canada Inc.
Capability profile
Loading True North Map…
Capability profile
CPI's GaNLink family provides solid-state RF power amplification and optional block upconversion for satellite-ground transmit chains. The 40 W saturated models are the SA46KOA SSPA and SB46KOA BUC. The SSPA accepts Ka-band RF for amplification; the BUC incorporates conversion from a lower-frequency input before amplification.
MKT-485 Revision 2, dated February 2025, gives waveform-dependent linear ratings. It specifies 25 W under defined 5 Msps modulated-signal and spectral-regrowth conditions, 20 W at 30–31 GHz for a two-tone test with -25 dBc IMD3 under MIL-STD-188-164B, and 16 W under the stated noise-power-ratio test. These operating points preserve the distinction between saturated output and usable linear output for a particular signal.
The SA46KOA is offered for 27.5–31 GHz or 27.5–30 GHz input and output. The SB46KOA table lists selectable dual-, tri- or quad-band operation in 1 GHz bands across 27.5–31 GHz, a 27.5–30 GHz wideband option, and a 30–31 GHz single-band option. Its listed input options are 950–1950, 1250–3750 and 1000–2000 MHz; the exact input/output combination needs to follow the selected configuration.
The datasheet specifies 63–69 dB gain, Ethernet and serial monitoring/control, BMIP and Keyline support, and optional redundancy switching. Outdoor operation uses forced-air cooling and a hot-swappable fan, with an IP66 enclosure. The stated -40°C to +60°C operating specification applies after 30 minutes of continuous operation, with altitude derating also specified. Listed shock and vibration regimes describe test requirements rather than a blanket military certification.
Separate 80 W and 160 W GaNLink siblings have their own power and linearity ratings. The named 2022 Lightspeed selection concerned the 160 W BUC and planned Georgetown production; it does not establish that every current family member is manufactured in Canada.
These describe the reviewed application scope, not confirmed deployments, released requirements or procurement eligibility.
Documented commercial product family with current model-specific electrical and environmental specifications. The 40 W models differ from higher-power siblings and historical vacuum-electron products. The 2022 Lightspeed selection concerns 160 W BUCs; current production responsibility and accepted deliveries remain product- and programme-specific.
CPI publishes current SSPA/BUC documentation and provides quotation and support routes. Specify the model, frequency conversion, waveform and linearity requirement, environmental conditions and redundancy option; confirm the applicable Canadian workshare.
A technology readiness level is not established by the reviewed public sources.
No reviewed Mission area or released Defence need connection is currently published.
These records support this capability and its published Mission area and Defence need connections. A source count is not a count of independent confirmations.
Communications & Power Industries
Source type: official company product
Supports: Capability · technicaldomainslugs
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technology readiness level
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · capability type
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · core features
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · defence applications
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · core features
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · core features
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · summary
CPI’s family table separately lists SA49KOA/SB49KOA 80 W saturated models with 40 W linear output, and SA52KOA/SB52KOA 160 W models with 80 W or 100 W according to spectral-regrowth criteria. These sibling ratings are not interchangeable with the SA46KOA/SB46KOA 40 W models.
Supports: Capability · commercial availability
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technical tags
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technical tags
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · core features
CPI’s family table separately lists SA49KOA/SB49KOA 80 W saturated models with 40 W linear output, and SA52KOA/SB52KOA 160 W models with 80 W or 100 W according to spectral-regrowth criteria. These sibling ratings are not interchangeable with the SA46KOA/SB46KOA 40 W models.
Supports: Capability · core features
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technical tags
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technical tags
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · defence applications
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · name
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · maturity
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · defence applications
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · summary
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Supports: Capability · technicaldomainslugs
Current GaNLink SA46KOA/SB46KOA models specify 40 W saturated and 20 W linear output, with 80 W and 160 W siblings. Legacy GaAs and current GaN specifications and product variants must remain distinct. CPI's group product page does not establish that these amplifiers are manufactured at its Canadian operation; Canadian production scope remains unconfirmed.
Communications & Power Industries
Source type: official report
Supports: Capability · core features
MKT-485 Rev 2 (February 2025) lists SA46KOA SSPA input/output options of 27.5–31 or 27.5–30 GHz. SB46KOA BUC options include dual-, tri- or quad-band switching in 1 GHz bands across 27.5–31 GHz, 27.5–30 GHz wideband, and 30–31 GHz single band; input options are 950–1950, 1250–3750 and 1000–2000 MHz. Exact input/output pairing is configuration-specific. The environmental table applies full performance after 30 minutes and specifies altitude derating.
Supports: Capability · defence applications
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Communications & Power Industries · Mar 22, 2022
Source type: official company news
Supports: Capability · summary
The March 22, 2022 announcement says Cobham selected CPI’s next-generation 160 W GaNLink block upconverters for its Telesat Lightspeed gateway tracking-antenna landing terminals, with production planned in Georgetown. This establishes selected product role and stated Canadian workshare, not current quantities, completed deliveries or customer acceptance.
Supports: Capability · maturity
The March 22, 2022 announcement says Cobham selected CPI’s next-generation 160 W GaNLink block upconverters for its Telesat Lightspeed gateway tracking-antenna landing terminals, with production planned in Georgetown. This establishes selected product role and stated Canadian workshare, not current quantities, completed deliveries or customer acceptance.
Communications & Power Industries
Source type: official company product
Supports: Capability · maturity
Communications & Power Industries's Cobham SATCOM selects CPI as RF supplier for Telesat Lightspeed supports Communications & Power Industries Canada Inc.'s capabilities 0 maturity: A current product datasheet and named supplier selection support a developed commercial product family; exact delivery and accepted system performance remain unknown.
Source type: official company product
Supports: Capability · maturity
Cobham SATCOM's Cobham SATCOM selects CPI as RF supplier supports Communications & Power Industries Canada Inc.'s capabilities 0 maturity: A current product datasheet and named supplier selection support a developed commercial product family; exact delivery and accepted system performance remain unknown.
Public sources cited · Facts and assessments kept separate · Human review
Loading related records…
Supports: Capability · core features
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technical tags
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalTags 0 from Communications & Power Industries's bounded record: Ka-band
Supports: Capability · maturity
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · defence applications
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 applications 2 from Communications & Power Industries's bounded record: High-throughput satellite communications
Supports: Capability · core features
The GaNLink 40 W datasheet lists selected Ka output bands including 27.5–30 and 27.5–31 GHz, with BUC L-band input options matched to the chosen configuration. It gives 63–69 dB gain, RJ45 Ethernet, RS-485/RS-232 and BMIP/Keyline interfaces, optional redundancy switching and custom EVM/MODCOD testing. These are configurable specifications; input/output combinations need exact model confirmation.
Supports: Capability · name
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 name: Ka-band solid-state power amplification and upconversion
Supports: Capability · technical tags
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalTags 2 from Communications & Power Industries's bounded record: solid-state power amplifier
Supports: Capability · core features
The GaNLink 40 W datasheet lists selected Ka output bands including 27.5–30 and 27.5–31 GHz, with BUC L-band input options matched to the chosen configuration. It gives 63–69 dB gain, RJ45 Ethernet, RS-485/RS-232 and BMIP/Keyline interfaces, optional redundancy switching and custom EVM/MODCOD testing. These are configurable specifications; input/output combinations need exact model confirmation.
Supports: Capability · technicaldomainslugs
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalDomainSlugs 1 from Communications & Power Industries's bounded record: space-and-earth-observation
Supports: Capability · core features
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 features 1: Solid-state power amplification
Supports: Capability · core features
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · core features
MKT-485 Rev 2 (February 2025) lists SA46KOA SSPA input/output options of 27.5–31 or 27.5–30 GHz. SB46KOA BUC options include dual-, tri- or quad-band switching in 1 GHz bands across 27.5–31 GHz, 27.5–30 GHz wideband, and 30–31 GHz single band; input options are 950–1950, 1250–3750 and 1000–2000 MHz. Exact input/output pairing is configuration-specific. The environmental table applies full performance after 30 minutes and specifies altitude derating.
Supports: Capability · technicaldomainslugs
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technical tags
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalTags 1 from Communications & Power Industries's bounded record: block upconverter
Supports: Capability · technicaldomainslugs
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalDomainSlugs 0 from Communications & Power Industries's bounded record: communications-and-cyber
Supports: Capability · capability type
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technical tags
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 technicalTags 3 from Communications & Power Industries's bounded record: satellite gateway
Supports: Capability · core features
The GaNLink 40 W datasheet lists selected Ka output bands including 27.5–30 and 27.5–31 GHz, with BUC L-band input options matched to the chosen configuration. It gives 63–69 dB gain, RJ45 Ethernet, RS-485/RS-232 and BMIP/Keyline interfaces, optional redundancy switching and custom EVM/MODCOD testing. These are configurable specifications; input/output combinations need exact model confirmation.
Supports: Capability · core features
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 features 0: 40-watt Ka-band output class
Supports: Capability · summary
The GaNLink 40 W datasheet lists selected Ka output bands including 27.5–30 and 27.5–31 GHz, with BUC L-band input options matched to the chosen configuration. It gives 63–69 dB gain, RJ45 Ethernet, RS-485/RS-232 and BMIP/Keyline interfaces, optional redundancy switching and custom EVM/MODCOD testing. These are configurable specifications; input/output combinations need exact model confirmation.
Supports: Capability · technical tags
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technicaldomainslugs
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · name
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · defence applications
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technical tags
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · commercial availability
MKT-485 Rev 2 (February 2025) lists SA46KOA SSPA input/output options of 27.5–31 or 27.5–30 GHz. SB46KOA BUC options include dual-, tri- or quad-band switching in 1 GHz bands across 27.5–31 GHz, 27.5–30 GHz wideband, and 30–31 GHz single band; input options are 950–1950, 1250–3750 and 1000–2000 MHz. Exact input/output pairing is configuration-specific. The environmental table applies full performance after 30 minutes and specifies altitude derating.
Supports: Capability · technical tags
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · technology readiness level
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · defence applications
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · defence applications
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 applications 1 from Communications & Power Industries's bounded record: Gateway transmit chains
Supports: Capability · commercial availability
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 commercialAvailability: CPI publishes current Ka-band SSPA and BUC product documentation.
Supports: Capability · summary
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 summary: Ka-band solid-state power-amplifier and block-upconverter equipment for satellite-ground RF transmission chains.
Supports: Capability · core features
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 features 3: Gateway and terminal integration
Supports: Capability · summary
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Supports: Capability · core features
MKT-485 Rev 2 (February 2025) lists SA46KOA SSPA input/output options of 27.5–31 or 27.5–30 GHz. SB46KOA BUC options include dual-, tri- or quad-band switching in 1 GHz bands across 27.5–31 GHz, 27.5–30 GHz wideband, and 30–31 GHz single band; input options are 950–1950, 1250–3750 and 1000–2000 MHz. Exact input/output pairing is configuration-specific. The environmental table applies full performance after 30 minutes and specifies altitude derating.
Supports: Capability · summary
The 40 W GaNLink datasheet specifies forced-air cooling, a hot-swappable fan, IP66 and −40 to +60°C operation at full specification after a 30-minute warm-up. Shock and vibration requirements cite MIL-STD-810H and IEC 60068-2-64 regimes; these are stated test levels, not blanket military certification. CPI says specifications can change and system use should be confirmed.
Supports: Capability · summary
MKT-485 Rev 2 (February 2025) lists SA46KOA SSPA input/output options of 27.5–31 or 27.5–30 GHz. SB46KOA BUC options include dual-, tri- or quad-band switching in 1 GHz bands across 27.5–31 GHz, 27.5–30 GHz wideband, and 30–31 GHz single band; input options are 950–1950, 1250–3750 and 1000–2000 MHz. Exact input/output pairing is configuration-specific. The environmental table applies full performance after 30 minutes and specifies altitude derating.
Supports: Capability · defence applications
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 applications 0 from Communications & Power Industries's bounded record: Satellite landing stations
Supports: Capability · capability type
True North Map derives Communications & Power Industries Canada Inc.'s capabilities 0 capabilityType from Communications & Power Industries's bounded record: Satellite RF power amplification and frequency conversion
Supports: Capability · core features
Communications & Power Industries's SA46KOA and SB46KOA 40 W SSPA and BUC supports Communications & Power Industries Canada Inc.'s capabilities 0 features 2: Block upconversion
Supports: Capability · core features
The 40 W GaNLink datasheet specifies forced-air cooling, a hot-swappable fan, IP66 and −40 to +60°C operation at full specification after a 30-minute warm-up. Shock and vibration requirements cite MIL-STD-810H and IEC 60068-2-64 regimes; these are stated test levels, not blanket military certification. CPI says specifications can change and system use should be confirmed.
Supports: Capability · technical tags
MKT-485 Rev 2 (February 2025) distinguishes SA46KOA SSPA from SB46KOA BUC. Both are 40 W saturated models. Linear output depends on test: 25 W under specified modulated-signal/spectral-regrowth conditions, 20 W for specified two-tone IMD3 per MIL-STD-188-164B, and 16 W under the noise-power-ratio test. Do not state 40 W linear or a universal linear power independent of waveform and distortion requirement.
Communications & Power Industries
Source type: official company product
Supports: Capability · commercial availability
CPI Amplifier Products identifies Georgetown headquarters and routes customers to manuals, product registration, service centres and training or maintenance-agreement enquiries. This is a support route, not a particular SLA or proof every group model is built in Canada.