Cleeve supplies selected interconnect components and configured wiring harnesses, panels and boxes. It combines distribution with design, build-to-spec assembly, qualification documentation and testing for aerospace, land, marine and industrial integration; component origin and final-assembly qualification depend on the order.
Technical detail
Core features
Connectors, contacts, backshells, wire/cable, heat-shrink materials and fully wired/tested harnesses; represented manufacturers and partner fabrication remain distinct from Cleeve assembly
CATIA/SolidWorks 3D design, drawings, tooling, prototypes/mock-ups, qualification reports and repair/overhaul manuals
Sealed and open-wire harnesses, overmoulding and electromechanical box/panel builds; marine choices include LSZH materials and corrosion-resistant connector materials
Purchase-order quality clauses can require OEM/shipment conformance certificates, lot/revision traceability, test reports, AS9102 first-article inspection and approved inspection/test plans
Linked legacy catalogue harness specification calls for at least 100 megohms insulation resistance at 500 ± 50 VDC for at least 1 second, maximum 500 milliohms conductor resistance and 1.5 ohms gross-shield resistance; these are acceptance requirements, not universal ratings or measured results
Amtivo certificate 252964 covers single-site design and distribution at Oshawa under AS9100D/ISO 9001:2015, expiring January 19, 2027 subject to annual assessments; CGP registration expires July 27, 2028 and does not qualify products
Interconnects
Cable-assemblies
Wire-harnesses
Electromechanical-assembly
Configuration-traceability
Use & integration
Recorded applications
Defence platform power and communications interconnection, including the documented LAV 6.0 Engineer cable requirement
Aircraft landing-gear and UAV harness integration, marine ship-to-shore cabling, and industrial control panels
These describe the reviewed application scope, not confirmed deployments, released requirements or procurement eligibility.
Evidence of maturity
Commercial component supply and project-specific assembly/engineering. DND award evidence establishes procurement; it does not establish accepted delivery. Company-described landing-gear, UAV, land and marine applications require configuration-specific qualification. The management-system certificate and conditional supplier quality clauses do not constitute blanket military or platform certification.
Commercial availability
Available through component orders, build-to-spec assemblies or collaborative engineering quotations, including kitting and post-delivery documentation/support. Agree the bill of materials, authorized sources, drawing revisions, environmental/electrical tests, traceability and acceptance deliverables with the order; public lead times and production capacity are not quantified.
Integration and verification
Readiness
A technology readiness level is not established by the reviewed public sources.
Reviewed connections
No reviewed Mission area or released Defence need connection is currently published.
Original sources 11 linked records
These records support this capability and its published Mission area and Defence need connections. A source count is not a count of independent confirmations.
Cleeve offers CATIA/SolidWorks design, prototype/mock-up work, qualification reports, finished assembly testing and configuration traceability. Customers can engage Cleeve for component sourcing, build-to-spec assemblies or collaborative design, with post-delivery support. Cleeve presents production and support services for landing-gear, UAV, land-vehicle and marine applications; qualification remains specific to the harness and programme.
Supports: Capability · core features
Cleeve offers UAV and fixed-wing/helicopter landing-gear harnesses, rugged sealed land-vehicle assemblies, marine feed-throughs and ship-to-shore cabling, communications harnesses/panels and industrial control boxes. Marine material choices include LSZH, stainless steel and nickel aluminium bronze connectors; qualification and field support depend on programme requirements.
Supports: Capability · core features
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · maturity
Cleeve offers UAV and fixed-wing/helicopter landing-gear harnesses, rugged sealed land-vehicle assemblies, marine feed-throughs and ship-to-shore cabling, communications harnesses/panels and industrial control boxes. Marine material choices include LSZH, stainless steel and nickel aluminium bronze connectors; qualification and field support depend on programme requirements.
Supports: Capability · technology readiness level
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · maturity
Cleeve offers CATIA/SolidWorks design, prototype/mock-up work, qualification reports, finished assembly testing and configuration traceability. Customers can engage Cleeve for component sourcing, build-to-spec assemblies or collaborative design, with post-delivery support. Cleeve presents production and support services for landing-gear, UAV, land-vehicle and marine applications; qualification remains specific to the harness and programme.
Supports: Capability · technicaldomainslugs
Cleeve offers UAV and fixed-wing/helicopter landing-gear harnesses, rugged sealed land-vehicle assemblies, marine feed-throughs and ship-to-shore cabling, communications harnesses/panels and industrial control boxes. Marine material choices include LSZH, stainless steel and nickel aluminium bronze connectors; qualification and field support depend on programme requirements.
Supports: Capability · technical tags
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · technicaldomainslugs
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · core features
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · capability type
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · defence applications
Cleeve offers UAV and fixed-wing/helicopter landing-gear harnesses, rugged sealed land-vehicle assemblies, marine feed-throughs and ship-to-shore cabling, communications harnesses/panels and industrial control boxes. Marine material choices include LSZH, stainless steel and nickel aluminium bronze connectors; qualification and field support depend on programme requirements.
Supports: Capability · commercial availability
Supply-chain services include component and ancillary hardware supply, bulk supply control, kitting, specifications/data sheets, subassemblies, monthly programme reports and scheduling support.
Supports: Capability · core features
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · technical tags
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · core features
Cleeve offers CATIA/SolidWorks design, prototype/mock-up work, qualification reports, finished assembly testing and configuration traceability. Customers can engage Cleeve for component sourcing, build-to-spec assemblies or collaborative design, with post-delivery support. Cleeve presents production and support services for landing-gear, UAV, land-vehicle and marine applications; qualification remains specific to the harness and programme.
Supports: Capability · technical tags
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · technical tags
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · commercial availability
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · summary
Cleeve offers CATIA/SolidWorks design, prototype/mock-up work, qualification reports, finished assembly testing and configuration traceability. Customers can engage Cleeve for component sourcing, build-to-spec assemblies or collaborative design, with post-delivery support. Cleeve presents production and support services for landing-gear, UAV, land-vehicle and marine applications; qualification remains specific to the harness and programme.
Supports: Capability · technical tags
Specialized current offerings include sealed cable assemblies, open-wire aerospace harnesses with configuration/material traceability, electromechanical box/panel builds and overmoulding advice/tool design. Production uses specialist cable manufacturers and trusted fabricators as well as Cleeve engineering; public page does not quantify IP, temperature, voltage or vibration envelopes.
Supports: Capability · summary
Current services include build-to-spec and collaborative engineering, CATIA/SolidWorks 3D design, tooling, prototypes/mock-ups, assembly drawings/procedures, qualification reports, tested assemblies, training and repair/overhaul manuals. These are offered service scopes, not blanket product qualification.
Supports: Capability · commercial availability
Cleeve offers CATIA/SolidWorks design, prototype/mock-up work, qualification reports, finished assembly testing and configuration traceability. Customers can engage Cleeve for component sourcing, build-to-spec assemblies or collaborative design, with post-delivery support. Cleeve presents production and support services for landing-gear, UAV, land-vehicle and marine applications; qualification remains specific to the harness and programme.
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · capability type
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
CTI-180 revision12/20 applies quality clauses when specified on purchase-order lines. Codes cover shipment/OEM conformance certificates with lot/revision data, traceable test reports, AS9102 first-article inspection, approved inspection/test plans, configuration-change notice, special-process NADCAP suppliers and counterfeit-part controls. These are conditional supplier requirements, not proof each delivered item passed every test.
Supports: Capability · commercial availability
CTI-180 revision12/20 applies quality clauses when specified on purchase-order lines. Codes cover shipment/OEM conformance certificates with lot/revision data, traceable test reports, AS9102 first-article inspection, approved inspection/test plans, configuration-change notice, special-process NADCAP suppliers and counterfeit-part controls. These are conditional supplier requirements, not proof each delivered item passed every test.
Tender W8486-238931/B published November1,2023 requires communications cable assemblies for in-service LAV6.0 Engineer Family of Vehicles under Land Command Support System. Canada specifications govern, component substitutes are disallowed, and controlled information requires registered/exempt/excluded CGP access. Only qualified W8476-145075 suppliers invited; no annex is publicly downloadable.
Supports: Capability · defence applications
Public sources cited · Facts and assessments kept separate · Human review
Designs and manufactures connectors, cables, wiring harnesses and electrical assemblies for mission-critical aerospace and defence systems.
Supports: Capability · defence applications
Defence platform power and signal interconnection
Supports: Capability · core features
Custom wiring-harness design and manufacturing
Supports: Capability · technical tags
True North Map applies the cable-assemblies tag from Cleeve Technology International's documented capability functions.
Supports: Capability · defence applications
Aerospace electrical integration
Supports: Capability · technicaldomainslugs
True North Map maps Military-qualified interconnect systems to communications and cyber from its documented technology functions.
Supports: Capability · core features
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · summary
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · name
Cleeve manufactures and assembles harnesses and interconnect products and also represents other global component manufacturers. Offerings include cables, connectors, contacts, backshells, heat shrink products, boxes, panels, PCB boards, conduit and specialty machined or sheet-metal parts; catalogue listing does not establish that every component is manufactured in Canada.
Supports: Capability · technology readiness level
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · core features
Cleeve manufactures and assembles harnesses and interconnect products and also represents other global component manufacturers. Offerings include cables, connectors, contacts, backshells, heat shrink products, boxes, panels, PCB boards, conduit and specialty machined or sheet-metal parts; catalogue listing does not establish that every component is manufactured in Canada.
Supports: Capability · summary
Cleeve manufactures and assembles harnesses and interconnect products and also represents other global component manufacturers. Offerings include cables, connectors, contacts, backshells, heat shrink products, boxes, panels, PCB boards, conduit and specialty machined or sheet-metal parts; catalogue listing does not establish that every component is manufactured in Canada.
Supports: Capability · name
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · defence applications
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · technical tags
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · technical tags
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · defence applications
Cleeve manufactures, assembles and distributes interconnect components, wiring harnesses, panels and boxes. Products include connectors, contacts, backshells, heat-shrink components and fully wired and tested harness assemblies. Cleeve lists its headquarters at 716 Colonel Sam Drive in Oshawa and a public solutions contact.
Supports: Capability · maturity
CTI-180 revision12/20 applies quality clauses when specified on purchase-order lines. Codes cover shipment/OEM conformance certificates with lot/revision data, traceable test reports, AS9102 first-article inspection, approved inspection/test plans, configuration-change notice, special-process NADCAP suppliers and counterfeit-part controls. These are conditional supplier requirements, not proof each delivered item passed every test.
Tender W8486-238931/B published November1,2023 requires communications cable assemblies for in-service LAV6.0 Engineer Family of Vehicles under Land Command Support System. Canada specifications govern, component substitutes are disallowed, and controlled information requires registered/exempt/excluded CGP access. Only qualified W8476-145075 suppliers invited; no annex is publicly downloadable.
Live government Controlled Goods Program record names Cleeve Technology Incorporated with expiry July27,2028 and matching public9055799502 phone. Record does not state site or technical scope and is not export approval, ITAR equivalence or product/customer qualification.
CanadaBuys original W8486-238931/001/QD~000 records Cleeve Technology Inc. award February19,2024 for CAD4,044,928 with scheduled expiry December31,2026. DND is buyer and PWGSC contracting organization; this is an award amount, not revenue or acceptance proof.
CTI-214 revision10/23 requires seller written acknowledgement of orders and buyer approval of specifications; default delivery dates are estimates and warranty addresses conformance to agreed specifications. It describes a configured quotation/order route, not a public fixed price or guaranteed delivery lead time.
Currently linked legacy catalogue section10 describes a customer-specific harness specification: insulation resistance minimum100megaohms at500±50VDC for at least1second, pin-to-pin conductor resistance maximum500milliohms and gross-shield maximum1.5ohms; first-article and100%production electrical inspection. These are specification/acceptance requirements, not published test results or universal finished-harness ratings.
Amtivo certificate252964 names Cleeve Technology Inc., 716 Colonel Sam Drive, Oshawa; AS9100D/ISO9001:2015 scope is Design and Distribution of Electrical Interconnect Systems and Components, single site. Latest issue December27,2024, expiry January19,2027, subject to annual assessments; the document is not a blanket manufacturing/product or military qualification.
Supports: Capability · core features
Amtivo certificate252964 names Cleeve Technology Inc., 716 Colonel Sam Drive, Oshawa; AS9100D/ISO9001:2015 scope is Design and Distribution of Electrical Interconnect Systems and Components, single site. Latest issue December27,2024, expiry January19,2027, subject to annual assessments; the document is not a blanket manufacturing/product or military qualification.
CanadaBuys, Public Services and Procurement Canada's public evidence confirms a company-specific project, award, program or operating context, while configuration-specific acceptance and scale remain bounded by the reviewer warning.
